Intro of Geekvape G Series Coils Box of 5

A coil is the small metal part inside your pod. It heats the liquid and turns it into vapour. It wears out over time, and when it does the taste goes flat or burnt. Then you put a new one in.

That is all a Geekvape G Series Coils Box of 5 is. Five coils, one resistance, nothing else. No pod in here and no device.

Most shops sell these as G18 coils. That name is misleading. The G18 Pen is only one of seven devices they fit. The name stuck because it is printed on some boxes, not because it tells you anything useful.

Geekvape calls them the G Series. They made one coil to fit their whole pod range, instead of a new coil for every kit. So if you own two Geekvape pods, the same box may well feed both. You can see the full wholesale Geekvape coils range if you are not sure which family you need.

Seven Geekvape Devices Take These

Geekvape Wenax Stylus
Geekvape Wenax C1
Geekvape Wenax SC
Geekvape Aegis Pod
Geekvape AP2, the Aegis Pod 2
Geekvape G18 Starter Pen Kit
Digiflavor DU Pod

That is unusual. Most brands change the coil shape with every new pod, so people with older kits get stuck. Geekvape did not do that here.

One thing to check first. A few shops say the 0.6 and 0.8 ohm ones do not fit the G18 Pen. If you own a G18 Pen and want a lower number, read the packet rather than guessing.

Five Resistances In A G Series Coils Box Of 5

Every box holds five coils, and all five are the same resistance. You pick which one when you order.

Resistance is the number printed on the side of the coil. You only need it for two things. How tight the draw feels, and how much vapour you get.

A high number gives a tight draw and less vapour. A low number gives a loose draw and more vapour. That is the whole idea.

Coil	Watts	How it feels	Liquid to use
G0.6 ohm	13 to 18W	Half-open draw, lots of vapour	Shortfills, low nicotine
G0.8 ohm	12 to 15W	Slightly loose	50/50 or shortfills
G1.0 ohm	10 to 12W	Normal cigarette draw	50/50 and nic salts
G1.2 ohm	9.5 to 11.5W	Tight	Nic salts
G1.8 ohm	7 to 9W	Tightest of the five	Nic salts at 20mg

Those watt numbers come from Geekvape. Sticking to them is the best way to make a coil last.

NOT SURE WHICH TO BUY?

Just switched from disposable bars?
Take 1.8 ohm with a 20mg nic salt. It is the tightest of the five and feels closest to a cigarette. Most people who have just stopped smoking end up here.

Been vaping a while and want a bit more?
Take 1.2 or 1.0 ohm. Still tight, a little more vapour, and both are happy with nic salts.

Want clouds and a loose draw?
Take 0.8 or 0.6 ohm with a shortfill at 3mg. Just know these use liquid two or three times faster.

Replacing one that worked?
Read the number off the old coil and order the same again. Do not go from memory. A 1.0 and a 1.2 look almost the same once they are in a pod.

Fitting A Geekvape Refill Coil

This takes two minutes and there is nothing to unscrew. Geekvape refill coils push straight in and pull straight out.

Tip any liquid left in the pod down the sink first.
Pull the old coil out. Give it a firm tug and it comes away.
Push the new coil in until it stops. If it is only half in, the pod will leak.
Fill the pod, then stand it upright and leave it five to ten minutes.
Take three or four gentle pulls without pressing anything. Then vape at the lowest watts in the range for the first tank.

Step four matters most, and it is the one everyone skips.

Inside every coil is a piece of cotton. It needs to soak up liquid before you heat it. Heat dry cotton and it burns, and a coil burnt on day one never gets better. You taste it until the day you throw it out.

Want to speed it up? Drip a few drops of liquid onto the cotton you can see through the side holes before you fit it. Not essential, but it halves the wait.

No pod left to fit it into? Empty refillable vape pods are sold separately from the coils.

What Kills Geekvape Coils In Bulk

A coil lasts one to three weeks. That is a big gap, and it is not down to how much you vape. It is down to what you put in it.

Sweet, dark liquids kill coils. Desserts, custards, anything thick with sweetener. The sugar burns onto the metal and leaves a black layer. After that, everything tastes of it.

The same coil might give you three weeks on a light menthol and five days on a custard. Nothing is wrong with the coil. It is the bottle.

So if yours are dying fast, look at what you are filling them with before you blame the hardware.

The other thing that kills them is power. These are low-watt coils. Push a 1.8 ohm past 9W and you will cook it inside two tanks.

This is why they come five to a box. If you vape dessert flavours, buying Geekvape coils in bulk is simply cheaper than ordering one at a time every week.

Boxes mix freely across resistances, so a bulk order of Geekvape G Series coils never leaves you stuck with five of something that does not suit you.

What To Put In The Pod

Liquid comes in two rough thicknesses, and the coil decides which one you need. Get this wrong and a perfectly good coil will taste burnt.

Thin liquid is 50/50, meaning half VG and half PG. It flows easily, so a small tight coil can pull it through fast enough. Nic salts are nearly all 50/50.

Thick liquid is 70/30 or more VG. It makes bigger clouds but moves slowly, so it needs a bigger coil with wider holes.

1.8, 1.2 and 1.0 ohm want 10ml nic salt e-liquid or 50/50 blends.
0.8 and 0.6 ohm handle 50ml and 100ml shortfill e-liquid at lower nicotine.

The mistake we see most is a thick 70VG shortfill in a 1.8 ohm coil. The cotton cannot keep up, so you get dry hits on a coil that is fine. Swapping the coil will not fix it. Changing the bottle will.

The other way round just wastes liquid. A thin nic salt in a 0.6 ohm coil at 18W tastes harsh and empties in a day.

G Series Against Geekvape's Other Coils

Geekvape makes several coil families. They look alike and they do not swap. The letter on the box is what tells them apart.

G is for pods. That is this one, and it is the only family built for small tight-draw pod kits.

The rest belong to tanks, which are the bigger screw-on kind you fit to a mod.

Geekvape B Series coils for the Z Nano tank
Geekvape M Series coils for the Z Max, made for big clouds
Geekvape Z Series coils for the wider Zeus tank range

Check the letter matches your device. That is all you need to do.

Coils Carry No Vape Duty

A coil is hardware, not liquid. The 2ml and 10ml limits that apply to pods and bottles do not touch it. Neither does the new tax that starts on 1 October 2026.

Vaping Products Duty is charged on vaping liquid only. A Geekvape G Series Coils Box of 5 carries none of it. [documented — gov.uk, Vaping Products Duty guidance]

But here is the part worth knowing, and almost nobody says it.

Your coil choice changes how much tax you pay. The tax is £2.20 for every 10ml of liquid. A 0.6 ohm coil uses two or three times more liquid than a 1.8 ohm one, so it pays two or three times the tax over the same number of days.

Going to a higher number cuts your liquid bill and your tax bill together. The UK vape tax explained goes through the sums for every format.

Refillable kit also sits outside the single-use vape ban. That ban only covers sealed devices you cannot recharge or refill, which is the opposite of this. [documented — gov.uk single-use vapes ban guidance]

Ordering G Series Coils Wholesale

The Box of 5 is the wholesale unit here. Five coils, one resistance, and boxes combine freely so you can take a spread.

Most buyers take more of the 1.2 and 1.8 on a wholesale order of G Series coils, because those two sell hardest to people coming off bars. The 0.6 and 0.8 move more slowly and suit the shortfill crowd.

How many to order? Work from how long a coil lasts you. At one to three weeks each, five boxes is twenty-five coils. That covers one person for most of a year on light flavours, or about four months on desserts.

Coils do not go off in the packet, so buying Geekvape G Series coils wholesale and holding them costs you nothing. No liquid inside to turn, no battery to go flat, nothing that spoils on a shelf.

Stocking other brands too? Vape coils from every brand covers every coil family we hold.

Common Questions

What is in a Geekvape G Series Coils Box of 5?

Five coils of the same resistance. No pod and no device. This is the part you replace, sold on its own.

Are these the same as G18 coils?

Yes. The G Series fits the G18 Starter Pen, and the same coil fits the Wenax and Aegis Pod kits. G18 is just how shops tend to list them.

Which resistance should I pick?

1.8 or 1.2 ohm with a 20mg nic salt for a tight cigarette-like draw. 0.8 or 0.6 ohm with a shortfill if you want more vapour.

Can I mix resistances on a wholesale order?

Yes. Each box is one resistance and boxes combine freely, so take more of the 1.2 and 1.8 and fewer of the rest.

Are Geekvape refill coils easy to change?

Yes. They push in and pull out, so there is nothing to unscrew. The only part that needs care is waiting five to ten minutes before you vape.

How long does one coil last?

One to three weeks. Sweet and dark liquids shorten it a lot. Light fruit and menthol stretch it out.

Why did my new coil taste burnt straight away?

It was fired before the cotton had soaked. Fill the pod, wait five to ten minutes, take a few pulls without firing, then start at low watts.

Can I run these above the stated watts?

Not for long. These are low-power coils and going over the range cooks the cotton inside a tank or two.

Do G Series coils fit the Z or Zeus tanks?

No. Those take the B, M or Z Series depending on the model. The letter marks the family and they do not cross over.

How many Geekvape coils should I buy in bulk?

Work from your own coil life. Five boxes is twenty-five coils, or roughly a year for one person on lighter flavours.

Do coils go off if I store them?

No. There is no liquid or battery inside, so a sealed coil keeps as long as you need. Buying ahead costs you nothing.

Geekvape G Series Replacement Coils - Box of 5