Geekvape Wenax Q Pod Kit: A Simple Overview

Wenax Q has a small screen. It shows the battery level and power setting. Pour e-liquid into a pod and slide it into place. Then inhale or press the button. With the Geekvape Wenax Q Pod Kit, you recharge the body and refill its pods. This device is for adults who vape.

Two Cartridges in the Retail Box

Geekvape supplies two 2ml cartridges with the original UK kit. Each has its own coil built inside, so there are no loose coils to fit.

0.6Ω cartridge: Fitted when you open the Box. Use 18 to 25W with the airflow set more open.
1.2Ω cartridge: The spare in the Box. Use 8 to 12W for a tight draw.

There is also one device and a USB-C charging lead. E-liquid is not included. The two cartridges are for different power ranges. Read the number printed on the cartridge before setting the watts. See which cartridges fit before ordering extra stock.

Screen, Button and Airflow Settings

The front screen shows the battery, selected watts and puff count. You can use the button to make vapour, or simply inhale. To change power, press the button three times quickly, then press again to move through the allowed settings. The device reads the fitted cartridge and limits the power range.

The side slider has three levels, from a tight draw to one that lets in more air. Press five times to lock the button. You can still inhale to use it while the button is locked. Follow the manual before storing it.

Unlike the screen-free Sonder Q, Wenax Q has a screen and manual power control. Both belong to the Q cartridge family.

Eight Original Colours

Geekvape lists Cobalt Blue, Rose Pink, Sakura Pink, Gradient Violet, Sunset Yellow, Turquoise Green, Gradient Dark and Black. These are the names on the original product sheet.

Each colour has the same screen, button and pod fitting. No.1 does not show a clear list of stock by colour. Check the chosen finish before placing an order.

Refilling and Choosing Spares

The supplied cartridges fill from the top. Gently remove the mouthpiece to reach the fill opening. Add e-liquid slowly, then push the top back into place. Keep liquid out of the centre air hole. After the first fill, wait a few minutes for the coil to soak.

When the built-in coil wears out, replace the full cartridge. An 0.8Ω Q cartridge, rated at 12 to 18W, is another compatible choice. Q cartridges fit this model, but U cartridges do not.

No.1 lists these Q spares with 1.2Ω, 0.8Ω and 0.6Ω choices. Its listing says XL without confirming the size. Check for the correct UK 2ml stock before ordering.

Geekvape Wenax Q Pod Kit for UK Trade

When ordering the Geekvape Wenax Q Pod Kit for a UK shop, ask about the colour, two 2ml pods and charging lead in its sealed Box. Ask No.1 to check the UK labels and the product's notification status. The maker lists 50 kits per shipping carton, but No.1 may use a different Box size. Ask how many kits are in its trade Box.

Keep the original model apart from the Q Pro and Q2. These newer devices have different controls and box contents, even though they also use Q pods. Retailers can review Geekvape's kit selection before adding another model.

Specifications and Charging

Detail	Listed value
Battery	Built-in 1000mAh
Output	Adjustable 5 to 25W
UK cartridge capacity	2ml each
Supplied cartridges	0.6Ω fitted, 1.2Ω spare
Display	HD OLED screen and button light
Start method	Inhale or button
Airflow	Three-level slider
Charging	USB-C
Size	108.91 × 23.8 × 13.8mm
Weight	About 52.1g

Charge with a suitable USB-C cable. The button light shows red below 30% battery, blue from 30% to 70%, and green above 70%. Battery life depends on use. A draw lasting over about ten seconds triggers the maker's cut-off protection.

Common Buyer Questions

Will it work when I take a draw?

Yes. With power on, inhaling starts the device. The button can start it too.

How do I change the wattage?

Press the button three times, then press again to choose a setting. Stay within the range for the fitted cartridge.

How do the 0.6Ω and 1.2Ω options differ?

The 0.6Ω pod is rated at 18 to 25W and suits a looser draw. For a close draw, the 1.2Ω pod runs at 8 to 12W.

Do Sonder Q cartridges fit the original Wenax Q?

Compatible Geekvape Q cartridges fit both devices. Check the resistance and UK 2ml size. Sonder U cartridges are different.

What should retailers check before ordering wholesale?

Check the UK cartridge size, chosen colour, Box contents, correct spare type, batch labels and outer carton quantity.