At A Glance: Innokin Coolfire IV Vape Kit, 40W

A Coolfire IV is a small box mod with its 2000mAh battery sealed inside. The body is aluminium. It stands 86mm tall and 42mm wide, with an open C shape cut into one side. Three buttons sit on the front: up, down and fire. The charging socket sits next to them. One side has a metal plate with the logo. The other side has vent holes. Those up and down buttons are the whole point. The power is yours to set, not fixed where the factory left it. Older pen style kits hand you one setting and nothing else. Here you get a range. Look through Mods On The Shelf and this one is the plain, older option that still does the job.

Both Styles: Innokin Coolfire IV Box Mod Kit

It reads coils from 0.2 ohms right up to 3.1 ohms. That one line is why it suits two very different customers.

Coil ohmsPowerDraw

1.0 and upLow endTight, on the mouth.

Under 1.0High endLoose, into the lungs.

The top row is the customer coming off cigarettes. The bottom row is the one who wants to see vapour. Same mod, two jobs. A plain pen cannot cover both rows, and our Kits One Step Up from a pen are where that changes.

There are two ways to set it. One is watts, from 6 up to 40. The other is volts, from 3 up to 7.5. Older customers often learned in volts and still think that way. Keep pressing at either end of the range and the number loops back to the far end. That catches people out the first time.

What The Little Screen Tells You

Four readings share the one display: coil resistance just measured, volts going out, watts, and battery left. Behind the fire button there is a small light doing the same job in colour.

Green nearly full · Yellow about half · Red plug it in.

When the light goes dark, charging has finished.

An eGo Adaptor Is Included

The top is a stainless steel 510. A spring sits behind the centre pin, so a tank meets it properly instead of sitting loose. A small eGo threading adaptor comes in the box as well. Small part, real use. Say a customer still owns an older eGo tank from years back. It screws onto this and they carry on, rather than buying everything again. Most of our Tanks To Pair are 510, and the adaptor covers the rest.

Six Colours: Innokin Coolfire IV Kit

Black, silver, red, blue, purple and pink. Nothing changes inside. The choice is only what the customer likes the look of. Black and silver go first in most shops. The three bright ones sit longer. So lean your order that way instead of taking six of each and hoping. The finish is painted aluminium, so a dropped one scuffs rather than cracks.

Counter Talk: Innokin Coolfire IV Kit Wholesale

One quirk is worth passing on with every sale. It saves a return. There is a switch underneath the mod that cuts the power off completely. Two ways to wake it, two different results.

Bottom switch → volts mode, watts setting gone.

Fire button → everything as the customer left it. Shops taking Innokin Coolfire IV Kit Wholesale should say that once at the counter. One more thing belongs in that chat. Say a customer only ever wants the tight draw. They are better off on an Innokin Endura T18E, which has no settings to learn. Two other things help. It charges over a plain micro USB lead and still works while plugged in. And it switches itself off before the battery drops too low, so the cell cannot be ruined.

Tank First: Innokin Coolfire IV Kit Bulk

Decide the tank before the quantity. Over the years this mod went out in several bundles. Each one had a different Innokin tank on top. It was also sold on its own, as just the mod. So an Innokin Coolfire IV Kit Bulk order should say plainly which pairing you want. Otherwise you take one in and sell the other. Either way, put coils in the same delivery.

The Innokin Coil Range covers both the tight and loose resistances, and a mod with nothing to fire is a mod that comes back.

FAQs

Can the power really be changed?

Yes. Six watts to forty, using the up and down buttons, or three to seven and a half volts if you switch modes.

Is the battery removable?

No, the 2000mAh cell is sealed in. There are no separate batteries to order with it, though we keep Our Vape Batteries for mods that need them.

Why did it forget my wattage?

The switch on the bottom was used. That one resets it to volts mode. Use the fire button to turn it on and the setting stays.

Is a tank bundled with an Innokin Coolfire IV Kit?

That depends on the pairing. The mod was sold alone and also in bundles with different Innokin tanks, so name the tank you want on the order and nobody guesses.

Will an old eGo tank screw on?

Yes, using the adaptor in the box. Without it the top is a plain 510, the same thread most tanks have had for years.

Does it work with the lead plugged in?

Yes. Innokin built it to work with the lead plugged in, so a flat battery does not end the evening. The socket wants 5 volts at 1 amp, which is an ordinary phone plug. A fast charger adds nothing here.

What do the button colours mean?

Green is nearly full, yellow is roughly half, red is low. No light at all means the charge is done. The screen carries the battery level too, so either one answers the question.

Which coils suit an Innokin Coolfire IV Mod Kit?

Anything between 0.2 and 3.1 ohms. Low numbers for lung draws at higher watts, high numbers for a tight draw at low watts. Match the coil first, then set the power to what that coil is rated for. The number is printed on the coil itself.

INNOKIN - COOLFIRE IV - VAPE KIT