Innokin Sceptre Pod Kit: An Introduction

The Innokin Sceptre Pod Kit is the original refillable Sceptre device, built around a pod that holds a replaceable coil. It supports mouth-to-lung (MTL) and restricted direct-lung (RDL) use, without a screen. It is not the Sceptre 2 or the pen-shaped Sceptre Tube.

Normal and Boost Are Coil-Specific

The Sceptre does not have a wheel for setting any wattage you like. It recognises the installed coil and offers two output levels. Innokin's original figures are:

Coil fitted	Normal	Boost
1.2Ω MTL	9W	10W
0.5Ω RDL mesh	18W	20W

For Boost, turn the device off with three button clicks. Then hold the button until the indicator changes from green (Normal) to purple (Boost). This alters the power, not the coil resistance.

The Sceptre Pod Has a Twist-Out Coil Base

Unlike a sealed-coil cartridge, the original pod can be used again when a coil wears out. Remove the pod, twist its base free, unscrew the spent head, thread on the replacement and refit the base. Reassemble it firmly before filling.

Innokin's S-coil replacement listing is on No.1, but its product page does not currently reveal which resistance options are selectable. Confirm 1.2Ω or 0.5Ω original Sceptre coils on the actual pack.

Airflow Settings for Two Different Draws

The airflow control is on the cartridge, not a slider on the device body. Select the narrower MTL opening for the 1.2Ω head, or open it further for the 0.5Ω RDL mesh coil.

MTL means drawing vapour into the mouth before inhaling. RDL uses a more open draw. Coil and airflow need to match.

Innokin Sceptre Colour Options

Innokin's first five plain finishes were Black, Blue, Grey, Pink and White. Its expanded manufacturer catalogue also lists Vogue Green, Vogue Purple, Vogue Pink, Vogue Grey and Groove Black.

These are historical finishes. The selected No.1 page could not be read to confirm which finishes, if any, can currently be ordered.

Battery Lights and Dual Activation

The built-in battery is charged through Micro-USB, not USB-C. Its LED indicates the remaining charge. A separate white light shines through the pod when it is seated and helps show the liquid level.

The Sceptre supports both draw activation and its firing button. A fixed ten-second cut-off and built-in electrical protections are listed by Innokin. Stop using damaged pods or coils.

Sceptre Technical Specifications

Battery: 1400mAh, integrated and non-removable.
Size: 106.8 × 29 × 18mm.
Pod: Side-filling, replaceable-coil type; UK version 2ml, international version 3ml.
Airflow: Two selectable settings on the pod.
Power: Coil-dependent Normal and Boost modes, not fully adjustable wattage.
Charging: Micro-USB, 5V/1A; resistance range 0.5 to 3.5Ω.

Filling and Choosing Bottled Liquid

Open the silicone tab on the pod's side and keep e-liquid out of the centre air channel. Give a new coil time to soak before use. If the pod light does not come on, check its orientation and that the twist-out base is secured.

For the 1.2Ω MTL coil, a 50/50 bottled liquid is a relevant format. No.1 lists Fresh Vape Co salts in 10ml, 10mg and 20mg options. Check the chosen strength and label; do not treat that link as a blanket pairing for the 0.5Ω RDL head.

Check the UK Kit Contents

Innokin's original kit documentation and UK reviews identify the device, refillable pod, 1.2Ω MTL and 0.5Ω RDL coils, Micro-USB cable and instructions. Confirm that the actual retail carton contains the 2ml UK pod rather than the overseas 3ml version.

For an Innokin Sceptre wholesale record, verify the seller's colour, available units and outer carton quantity first. No.1 includes this model in its wholesale pod kits collection; that listing alone does not confirm the physical stock batch.

Questions Before Selecting Stock

Does the original Sceptre use Sceptre 2 pods?

Do not assume so. The original pod has a twist-out coil base; the Sceptre 2 uses a different cartridge and push-fit coil arrangement. Match the whole pod to the exact generation.

Must I press Fire every time?

No. Either inhale to activate the original Sceptre or use its button, provided the device is on and the pod is correctly seated.

Can the 1.2Ω coil be used on Boost?

Yes. It changes from 9W to 10W in Boost mode. The original 0.5Ω mesh coil changes from 18W to 20W.

Does the pod have to be replaced with every burnt coil?

No. The separate coil can be changed if the original pod and its seals remain undamaged.

How many devices are in a wholesale carton?

No verified case quantity is available from the inspected No.1 catalogue. Check the sealed outer packaging rather than assuming a Box of N.

INNOKIN SCEPTRE POD KIT