The Original Lost Vape Ursa Nano Pro 25W Pod Kit

Early Ursa products can look alike in catalogue photos, yet the Nano Pro belongs to a particular part of Lost Vape's original range. It is a compact refillable device with its own controls and cartridge arrangements, not the Nano S, Nano Art or a later Ursa release. Correct identification matters when shops compare stock or customers need a compatible replacement.

For adults, the Lost Vape Ursa Nano Pro 25W Pod Kit offers a rechargeable system with adjustable settings. Its two cartridge formats also call for different maintenance, which is why a device-only purchase and a complete original kit should not be confused.

A Screen with Direct Power Control

The 0.42-inch OLED screen shows the selected output. Lost Vape specifies 5–25W, but each heating element has its own permitted limit. Not every cartridge can run at 25W.

The firing button has three distinct commands:

Five rapid taps: Switch the device between powered and off states.
Three quick presses: Enter wattage adjustment, then press to change the setting in 0.5W steps.
Four quick presses: Lock or unlock adjustment while leaving the firing button usable.

The manual also allows faster adjustment by holding the button. When a coil reaches its permitted maximum, the screen displays a limit message. Do not keep raising power to chase the overall 25W figure.

Two Ways to Activate the Device

Press the button to fire manually, or inhale for automatic draw activation. The side airflow control works independently, so opening the air intake does not select a higher wattage.

Understanding the Two Heating Arrangements

Two refillable arrangements are available, but their replacement parts differ.

Cartridge arrangement	What gets replaced
0.6Ω mesh cartridge	The heating element is built in. Replace the complete cartridge when worn.
Empty Ursa housing with UB Mini S1 0.8Ω coil	Fit a separate compatible coil. Keep the housing while its seals and contacts remain sound.

A separate coil does not fit inside the sealed 0.6Ω version. With the empty housing, check that the UB Mini coil is seated correctly before filling.

Specifications and Charging Details

Battery: Built-in 900mAh cell. Adjustable output is 5–25W, subject to coil limits.

Build: Aluminium alloy, 94.4 × 24 × 14mm and approximately 49.5g.

Capacity: 2ml TPD version or 2.5ml international version. No.1's actual carton is unverified.

Charging: USB-C. Manufacturer material mentions 5V/2A cable support. A wall charger is not confirmed.

Nine Original Colour Finishes

Original colours include matte Classic Black, Navy Blue and Electric Violet, glossy Babe Pink, and five gradients: Sunrise G, Midnight G, Sakura G, Mojito G and Antarctica G.

Catalogue names alone cannot establish which colours No.1 has available. All share the same battery and cartridge design.

Refilling, Airflow and Routine Care

Remove the cartridge, lift the soft refill stopper and add liquid through its side opening, avoiding the centre air channel. Close it securely, refit the cartridge and allow a new coil at least five minutes to soak. Check the seal and wipe away any liquid on the electrical contacts.

Move the side airflow control for a tighter or airier draw. A lasting burnt taste calls for a new sealed cartridge or separate coil, depending on the fitted arrangement. See the coil care guide for more detail.

Matching Replacement Parts for Retail Stock

No.1 lists 0.6Ω Ursa cartridges in threes and an empty Ursa housing. The latter does not confirm capacity or coil contents. No standalone UB Mini S1 coil listing could be verified on No.1. Check the printed part number before assuming either fits the stocked batch.

For Lost Vape Ursa Nano Pro 25W Pod Kit wholesale orders, verify UK 2ml stock, finish, carton contents and spares. The wholesale device collection offers additional devices with their own spare-part requirements. An outer trade Box of N quantity is unverified. Confirm physical packaging, not just an online selling-unit name.

Common Questions About Use and Compatibility

Can I adjust the wattage on the Lost Vape Ursa Nano Pro 25W Pod Kit?

Yes. The screen supports 5–25W adjustment, within the fitted cartridge's limit.

Does it work without pressing the firing button?

Yes. It has inhale activation and button firing. The button also adjusts wattage.

When should I replace the whole cartridge?

Replace the sealed 0.6Ω cartridge when worn. A compatible empty housing accepts a separately replaceable UB Mini coil.

Will every Ursa replacement product fit this model?

No. Check the housing, coil type and capacity against the exact model. Other Ursa generations may use different parts.

What should a UK retailer verify before buying in bulk?

Confirm the 2ml SKU, notification, labels, colours, cartridge arrangement and quantity. Do not substitute the 2.5ml international version.

Lost Vape - Ursa Nano Pro 25W - Pod Kit