About the VOOPOO Vinci Pod Kit

No.1 lists the VOOPOO Vinci Pod Kit as the original VINCI Mod Pod, with a refillable cartridge and a coil that can be changed without replacing the device. This is the screen-equipped 40W model, not the later slim 15W VINCI Pod.

A Screen With a Fourteen-Day Record

One unusual feature is its PUFF history. The colour display shows daily inhalation counts and a record for the previous fourteen days. Press the plus and minus keys together to open that view. This is a usage log, not a measure of nicotine intake.

The 0.96-inch screen also displays wattage, resistance and operating status. GENE.AI recognises a fitted coil and restricts unsuitable high-power settings. You can still choose a lower setting.

Three Ways the Vinci Can Fire

Three presses of Fire cycle between manual, automatic and double-activation modes. Manual requires the button; automatic responds to inhalation; double mode permits either method. A five-click Fire sequence turns power on and off.

The separate plus and minus controls adjust wattage. Read the actual coil rating before adjusting power.

Original VINCI Colour Finishes

The documented original ten finishes include Aurora, Dazzling Green, Space Grey, Carbon Fiber, Peacock, Scarlet, Ink, Opal, Hill Yellow and Jade Green. Rainbow-pattern versions were also marketed later. These are historical options, not confirmed stock.

No.1's colour selector does not reveal which finishes remain available.

Why the Supplied Coil Names Matter

The original VINCI cartridge accepts removable first-generation PnP heads, rather than today's PnP X or integrated VINCI Pod cartridges. Two manufacturer documents disagree about the second coil in the box:

PnP-VM1 0.3Ω: Appears in both documents; its stated working range is 32-40W.
PnP-VM4 0.6Ω: Listed in the manufacturer's current TPD pack, rated 20-28W.
PnP-R1 0.8Ω: Named in the older manual and No.1's listing, rated 12-18W.

The latter two should be treated as alternative recorded carton specifications, not three supplied heads.

Turning the Cartridge to Change Airflow

Rotate the original cartridge by half a turn before seating it. Its two orientations line up with different air openings, allowing a tighter or looser draw. This is not a sliding airflow control and does not alter the resistance of the fitted coil.

VOOPOO Vinci Technical Specifications

Battery: Integrated 1500mAh, with Micro-USB charging at 5V/1A.
Power: Adjustable 5-40W; output voltage 3.2-4.2V.
Display: 0.96-inch colour screen with GENE.AI controls.
Supported electrical resistance: 0.1-3.0Ω, subject to physical coil fit and wattage.
UK pod: 2ml refillable PCTG cartridge; international versions hold 5.5ml.
Approximate full-kit size: 104 × 25.3 × 25.3mm; the manual separately measures the body at 77mm high.

Refilling and Finding the Correct Spares

Lift the silicone plug on the cartridge, fill through its side slot and seat the push-fit coil from underneath. Give new cotton about five minutes to absorb liquid before firing.

No.1 lists VINCI 2ml empty cartridges, but its product title and variant information are inconsistent. Confirm the original Mod Pod and PnP opening before treating them as suitable spares. Its VINCI replacement coils also need an exact resistance and coil-code check.

Checking the First-Generation Carton

VOOPOO lists one device, one 2ml TPD pod, two original PnP heads, charging cable, instructions and cards. The current website lists VM1 plus VM4, while its older manual and No.1 list VM1 plus R1. No.1 has not verified the physical carton or outer case quantity.

Both supplied sub-ohm setups call for care when selecting e-liquid. Do not assume a high-strength Nic Salt bottle suits either head. A separate suitable lower-power original PnP coil needs its own compatibility check.

Identify the Correct VINCI Trade Product

Before assigning a VINCI wholesale SKU, check the 1500mAh/40W device, UK 2ml pod, coil codes and colour. No.1 has a second listing with the same product title for an 800mAh/15W device. The VOOPOO pod kit collection contains both, but they must not share a product description or replacement-pod claim.

Original VINCI Questions

Will newer PnP X heads fit the first VINCI mod?

No. The 2019 cartridge was designed for original PnP heads. PnP X is a different platform.

Does locking the device stop it firing?

Yes. Press Fire and plus together to lock or unlock it. The manual says it cannot fire or change power while locked.

How can I clear the puff counter?

Press Fire and minus together. That command clears the recorded counter; it does not reset the battery.

Is the newer 800mAh VINCI Pod a spare for this kit?

No. That is a separate complete device using integrated-coil cartridges, not an original 40W VINCI cartridge.

Is a full carton quantity stated for wholesale?

No verified outer-box quantity appears on this listing. Check the supplier's actual sealed pack before recording a case size.

VOOPOO - VINCI - POD KIT